- The future of insulation technology begins with LifeTech.
Revolutionary
Thermal insulation
ThermalX
- Even 0.5mm ThermalX provides better insulation than 12cm Styrofoam
- Innovative nano-structure
- Diffusion monkeys & mineral
- For existing buildings & new construction
- Easy processing
High-performance coating for insulating industrial plants & building structures
Highly effective thermal insulation
layer thickness of only a few millimeters.
Application using an airless device, brush or roller
CE marking
PN-EN & ETA certified
PN-EN 15824:2010
PN-EN 1062-1: 2005
PN-EN 1504-2:2006
High performance Nanocoating to increase energy efficiency in buildings & facilities.
Minimal setup.
Maximum effect.
Nanotechnology
The system is based on…
- Ceramic hollow spheres
- Diffusion-open mineral structure
- Radiation reflection
- Reduced convection
- Minimized heat conduction
Effect
Our innovative coating…
- Reduces heat transfer
- Reflects heat radiation
- Minimizes energy losses
- Improves surface temperature
- Increases building efficiency
Why build up centimeters when millimeters are enough?
- Invest in performance – not in mass.
- Technology
From industry and space travel for buildings
From industry and space travel
for buildings
ThermalX solves problems – it reduces construction costs and energy consumption and Labor costs. Thanks to unique ceramic vacuum nanospheres, incredible thermal insulation with a thickness of just one millimeter can be achieved.
This includes ThermalX Mineral, easy to process and diffusion-open.
- Real Estate & Property Construction
- ThermalX - Energy-efficient facade optimization without traditional insulation
Ready for the next generation of
THERMAL INSULATION?
- Up to 70% energy consumption savings
- Suitable for single-family homes, multi-family homes, commercial properties
- Executed as square meter output with 30 years of manufacturer's warranty
- Up to 20% BAFA funded
ThermalX is not an insulation material, but a reproducible coating system for the energy optimization of facades – without changing the building fabric.
- Application as paint: roll, spray or paint (Spraying with is recommended
the airless device) - No ETICS construction
- No additional insulation layers
- Completed in a few days – even with operation running.
- No loss of space when used indoors
- The architectural design of the facade is completely preserved.
It is a thermal barrier-forming coating system, similar to a thermos flask, with only about 0.5 mm per layer (Facade usually 2 layers).
Further advantages of using ThermalX
- Breathable and moisture-regulating – prevents mold growth
- No harmful emissions, VOC-free, tested according to ETA.
- Also ideal for bedrooms, children's rooms or basements.
- It is even suitable for mold remediation, as PScoat removes moisture from the
Pull out the wall and the mold will therefore no longer have a breeding ground. - Weatherproof, UV-resistant, easy to clean.
- Low maintenance – no algae or moss infestation as with classic ETICS.
- Layer thickness and consumption are system-critical
- Reproducible results on all facades
- Liability and warranty via the system
- Exclusion of typical application errors
- Assessment of the subsoil
- System-appropriate application
- Control of consumption and layer thickness
- Documentation of the execution
The price per square meter depends on the area and the substrate
and accessibility of the facade.
There are no flat rates – each property is individually assessed.
| ETICS | Classic insulation | ThermalX outdoor system |
|---|---|---|
| 🔴 High intervention | 🟡 Sensitive to building physics | ✅ No change in substance |
| 🔴 High construction costs | 🟡 Risk of thaw water | ✅ Fast implementation |
| 🔴 Permits required | 🟡 Space loss | ✅ Outdoor application without loss of area |
Generally not, as no structural changes are made.
- Note for larger objects
For larger residential complexes, portfolios or special properties, we offer
also partial executions, system deployment and project-related solutions.
Before/after image from real-world application
Comparison image from real-world application
Don't rely on sheer volume — rely on Technology.
- Application in monument protection
Styrofoam vs. ThermalX in direct comparison
This building –with the exception of the listed front facade – was already equipped with 12 cm thick EPS insulation.
Nevertheless, it turned out that even a coating of only 0.5 mm ThermalX This resulted in a higher surface temperature of the wall than the existing 12 cm EPS insulation.
This observation aligns with numerous user experiences, according to which lower room air temperatures after coating are sufficient to achieve a pleasant and comfortable room climate.